Kronenberg AZP18
Built: 2000 · Series: Other models
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kronenberg – other models: the collective page of trailers outside the named ranges, AZP18, AZW 18 and HK, 1,230 to 4,660 kg unladen weight, 1,300 to 18,000 kg gross weight
This page gathers the Kronenberg trailers the register could not assign to a named range – with three versions this amounts to the whole programme listed here. The types AZP18 and AZW 18 carry the same ending number 18 with a different letter code, while the third entry, HK, stands on its own. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 3 versions with unladen weights from 1,230 to 4,660 kg, gross weights from 1,300 to 18,000 kg, lengths from 9,130 to 9,350 mm and widths from 1,720 to 2,550 mm.
The span from 1.3 to 18 tonnes gross weight reaches from the light version still towable on an ordinary car licence to a full-size truck trailer of over nine metres in length; the heaviest version requires a CE licence. The close lengths of the larger versions, from 9.13 to 9.35 metres, match the size of typical two-axle truck trailers.
On a used example, different points count depending on the weight class: on the light version the axle, overrun brake and frame corrosion, on the heavy ones the condition of the axle assemblies and brake electronics. Lighting, the plug connection, and tyres and rims should be checked at every size. Parts for such small brands usually run through independent trailer and commercial-vehicle workshops.
Sources: SpecCodex register, model data: Kronenberg (weitere Modelle)
Technical data
Dimensions and weights
| Length | 9,350 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,050 mmcorrect |
| Unladen weight | 4,660 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Kronenberg AZP18 weigh?
The unladen weight is 4,660 kg.
What is the gross vehicle weight of the Kronenberg AZP18?
18,000 kg.
Up to what speed is the Kronenberg AZP18 approved?
Approved up to 100 km/h.
What are the dimensions of the Kronenberg AZP18?
9,350 mm × 2,550 mm.
When was the Kronenberg AZP18 built?
Production years: 2000.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
