Krone Szc 20
Built: 1998-2007 · Series: SZC
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Krone SZC: six class O4 semi-trailers from Werlte, unladen weight 2.70 to 4.60 t, gross vehicle weight 20 to 34 t, lengths 6.77 to 12.57 m
The SZC range from Krone in Werlte, Emsland, covers class O4 semi-trailers. The versions listed in the register, from SZC 16 to SZC 20 Z, differ markedly in length and gross weight, running from shorter, lighter to long, heavy variants of the range. As with many semi-trailer ranges, equipment details such as axle count, braking system and underrun protection vary by order year and customer specification.
Read on 3 more paragraphs
The register lists 6 versions with unladen weights from 2,700 to 4,600 kg, gross vehicle weights from 20,000 to 34,000 kg, lengths from 6.77 to 12.57 m and widths from 2.47 to 2.55 m.
Krone is among the largest European semi-trailer makers; with the SZC range the Werlte plant covers a size bracket below full long-haul length, suited to shorter runs and adjusted load volumes. In long-haul use such a semi-trailer typically works for several years in two-shift operation before moving into the used market for shorter, regional routes.
When buying used, what counts in this semi-trailer class is the condition of the kingpin, landing legs and axle assemblies, corrosion on the chassis and body panels, the function of the braking system, and the condition of tyres and lighting; a current inspection report should be in place before purchase. Checking that the chassis number matches the registration papers, and reviewing the service book, also belong to the pre-purchase inspection.
Sources: SpecCodex register, model data: Krone SZC, Krone (manufacturer)
Technical data
Dimensions and weights
| Length | 6,900 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,900 mmcorrect |
| Unladen weight | 2,700 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Krone Szc 20 weigh?
The unladen weight is 2,700 kg.
What is the gross vehicle weight of the Krone Szc 20?
20,000 kg.
Up to what speed is the Krone Szc 20 approved?
Approved up to 100 km/h.
What are the dimensions of the Krone Szc 20?
6,900 mm × 2,550 mm.
When was the Krone Szc 20 built?
Production years: 1998-2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.