Krone SDP 27 ELB2-CS
Built: 2005-2005 · Series: SDP
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Krone SDP – the collection page for Bernard Krone's heavy semi-trailer series from Werlte, 4.5 to 8.9 t unladen weight, up to 43 t gross weight, widths up to 2.6 m
The SDP series belongs to Bernard Krone's semi-trailer programme, built by its commercial-vehicle division Krone Trailer in Werlte in the Emsland region; the group began in 1906 as an agricultural machinery maker and has built truck trailers and semi-trailers for decades. Within the SDP series, the digits after the code (20, 22, 24, 27 or 30) denote the body size, while suffixes such as ELB, ELG, ELP or ELNZ mark individual equipment variants. One version is expressly built for piggyback (Huckepack) transport of swap bodies.
Read on 3 more paragraphs
The register lists 36 versions with an unladen weight from 4.5 to 8.92 t and a gross weight from 27 to 43 t. Widths range from 2.46 to 2.6 m.
These figures point to heavy semi-trailers for long-haul and heavy-duty use, of the kind found in combined transport and in general cargo and building-material haulage. The SDP series thus sits alongside Krone's better-known curtainsider and box-body ranges in the heavy end of its semi-trailer programme.
When buying used, axles, brakes and air suspension deserve particular attention, along with cracks and corrosion on the frame and the kingpin mounting. On piggyback versions, the swap-body locking mechanism should be checked for function. Wiring, lights and the connections to the tractor unit should also be inspected, along with tyre condition; spare parts are available from Krone dealer workshops and semi-trailer specialists.
Sources: Kennwerte der Modelle Krone SDP, Krone (Hersteller)
Technical data
Dimensions and weights
| Length | 13,880 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,000 mmcorrect |
| Unladen weight | 7,450 kgcorrect |
| Gross vehicle weight | 41,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Krone SDP 27 ELB2-CS weigh?
The unladen weight is 7,450 kg.
What is the gross vehicle weight of the Krone SDP 27 ELB2-CS?
41,000 kg.
Up to what speed is the Krone SDP 27 ELB2-CS approved?
Approved up to 100 km/h.
What are the dimensions of the Krone SDP 27 ELB2-CS?
13,880 mm × 2,550 mm.
When was the Krone SDP 27 ELB2-CS built?
Production years: 2005.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
SDP
SDP 20ZLNZ-CS
SDP 22
SDP 24
SDP 24 T2
SDP 24 T3
SDP 24 TL1
SDP 24-1
SDP 24-U-1
SDP 24-U-2
SDP 24F
SDP 27
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.