Krone SDC27 ELTU5
Built: 2007 · Series: SDC27
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Krone SDC27: six class O4 curtainsider semi-trailers from Werlte, unladen weight 3.75 to 5.70 t, gross vehicle weight 27 to 43 t, lengths 11.30 to 13.28 m
The SDC27 range from Krone in Werlte, Emsland, belongs to the Profi Liner product family, the maker's curtainsider semi-trailers with sliding-curtain bodywork. The versions listed in the register, from SDC27 to SDC27 ELTU5 PLUS, differ in equipment and length within the range. As with many semi-trailer ranges, equipment details such as axle count, braking system and underrun protection vary by order year and customer specification.
Read on 3 more paragraphs
The register lists 6 versions with unladen weights from 3,750 to 5,700 kg, gross vehicle weights from 27,000 to 43,000 kg, lengths from 11.30 to 13.28 m and widths from 2.43 to 2.55 m.
Krone is among the largest European semi-trailer makers, and the Profi Liner as a curtainsider semi-trailer is widely used in European long-haul traffic, where side-opening curtains ease loading and unloading at the ramp. The side opening also allows forklift loading along the full load length, which on enclosed box semi-trailers is only possible through the rear door.
When buying used, what counts on curtainsider semi-trailers is the condition of the sliding curtain and tensioning mechanism, corrosion on the chassis and roof bows, the function of the braking system, and the condition of axles, tyres and landing legs; a current inspection report should be in place before purchase. Checking that the chassis number matches the registration papers, and reviewing the service book, also belong to the pre-purchase inspection.
Sources: SpecCodex register, model data: Krone SDC27, Krone (manufacturer)
Technical data
Dimensions and weights
| Length | 13,283 mmcorrect |
|---|---|
| Width | 2,480 mmcorrect |
| Unladen weight | 3,900 kgcorrect |
| Gross vehicle weight | 27,000 kgcorrect |
Frequently asked questions
How much does the Krone SDC27 ELTU5 weigh?
The unladen weight is 3,900 kg.
What is the gross vehicle weight of the Krone SDC27 ELTU5?
27,000 kg.
What are the dimensions of the Krone SDC27 ELTU5?
13,283 mm × 2,480 mm.
When was the Krone SDC27 ELTU5 built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
