Kompenhans KHM 9113
Built: 1994-1994 · Series: Other models
More machines from model year 1994
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kompenhans KHM 9113: a compact EU class O4 trailer with a 12,500 kg gross weight packed into just 4.55 m of overall length
With a gross weight of 12,500 kg, the KHM 9113 falls into EU trailer class O4, the heavy trailers and semi-trailers registered above 10 tonnes. At just 4.55 m long and 2.50 m wide, it is remarkably short for this weight class, pointing to a very compact, powerfully built construction rather than a long load bed stretched out over the chassis.
Read on 3 more paragraphs
At a kerb weight of 2,630 kg, the payload works out to 9,870 kg, almost four times the trailer's own weight. The spacing within the axle group is only 1,380 mm, close together for such a heavy trailer, which combined with the short overall length points to a tightly packed, robust axle assembly beneath a short, low-slung body built for concentrated loads.
Class O4 requires compressed-air brakes throughout. Such a compact, heavy build on a short length is typical of trailers carrying concentrated, heavy loads such as construction machinery, containers or dense bulk material, without needing much standing space on site to manoeuvre.
When buying used with a build like this, the tightly packed axle group matters most: wheel bearings, brakes and the mounting points on the short frame are put under heavy strain by the concentrated load and should be checked for wear and cracks. The air-brake system, including its lines, also belongs in a thorough inspection before purchase.
Technical data
Dimensions and weights
| Length | 4,550 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 1,380 mmcorrect |
| Unladen weight | 2,630 kgcorrect |
| Gross vehicle weight | 12,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Kompenhans KHM 9113 weigh?
The unladen weight is 2,630 kg.
What is the gross vehicle weight of the Kompenhans KHM 9113?
12,500 kg.
Up to what speed is the Kompenhans KHM 9113 approved?
Approved up to 100 km/h.
What are the dimensions of the Kompenhans KHM 9113?
4,550 mm × 2,500 mm.
When was the Kompenhans KHM 9113 built?
Production years: 1994.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.