Start › Mining equipment › Komatsu › WD600-3

Komatsu WD600-3

Series: Komatsu Wheel Dozer

Source: https://www.komatsu.eu/de/alte-modelle/radlader/wa600-3

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The WD600-3 from Komatsu is part of the Komatsu Wheel Dozer series. The engine delivers 529.2 hp (361.7 kW), with a displacement of 23,154.9 cm³. The wheelbase measures 4,090.4 mm. Ground clearance is 481.6 mm. The tank holds 670 litres. The gearbox has 4 forward gears. There are also 4 reverse gears. The hydraulic tank holds 215 litres. The cooling system holds 160.1 litres. The oil fill is 46.9 litres. The electrical system runs on 24 V. The engine fitted is the SAA6D170E-3. The Komatsu Wheel Dozer series covers 6 models. Rated output within it ranges from 157.1 to 537.4 hp; the WD600-3 sits at the top of that range with 529.2 hp. Its immediate neighbours are the WD600-1 below it with 459.6 hp and the WD600-6 above it with 537.4 hp. 1159 Komatsu models across 39 series are on record. The model is listed under Mining equipment. 16 verified figures from 1 source are on file.

Technical data

Engine

Engine modelSAA6D170E-3correct
Power529.2 hp (361.7 kW)correct
Displacement23,154.9 cm³correct
Aspirationair-to-air aftercooled, turbochargedcorrect
Coolant capacity160.1 lcorrect
Engine oil capacity46.9 lcorrect

Dimensions and weights

Wheelbase4,090.4correct
Ground clearance481.6correct

Drivetrain and chassis

Gearbox typefull-powershift transmission, planetary gear typecorrect
Forward gears4correct
Reverse gears4correct
System voltage24 Vcorrect

Working data

Hydraulic oil capacity215 lcorrect
Fuel tank capacity670 lcorrect

Other data

Height4,242.8correct

Frequently asked questions

How much power does the Komatsu WD600-3 have?

The Komatsu WD600-3 delivers 529 hp.

What engine does the Komatsu WD600-3 have?

23,155 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

D61PX-15

WD420-3

WD600-1

WD600-6

WD900-3

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare