Komatsu WA250PT-5 (2895.6 mm)
Series: Komatsu Integrated Tool Carrier
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | SAA6D102E-2correct |
|---|---|
| Power | 140.9 hp (99.9 kW)correct |
| Displacement | 5,883 cm³correct |
| Aspiration | turbocharged, air-to-air aftercooledcorrect |
| Coolant capacity | 17.4 lcorrect |
| Engine oil capacity | 20.8 lcorrect |
Dimensions and weights
| Wheelbase | 2,895.6correct |
|---|---|
| Ground clearance | 457.2correct |
Drivetrain and chassis
| Gearbox type | hydrostatic transmission, 1 pump, 2 motors with speed range selectcorrect |
|---|---|
| Forward gears | 4correct |
| Reverse gears | 4correct |
| Tyre size | 20.5/25 (L2)correct |
| Turning radius | 4,970 mmcorrect |
Working data
| Lift height | 3,810 mmcorrect |
|---|---|
| Hydraulic oil capacity | 67 lcorrect |
| Fuel tank capacity | 184 lcorrect |
Other data
| Cab height | 3,252.2correct |
|---|---|
| System voltage | 24 Vcorrect |
More machines with this engine (Komatsu SAA6D102E-2, 17)
Frequently asked questions
How much power does the Komatsu WA250PT-5 have?
The Komatsu WA250PT-5 delivers 141 hp.
What engine does the Komatsu WA250PT-5 have?
5,883 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.