Start › Excavators & compaction › Komatsu › PC95R-2

Komatsu PC95R-2

Series: Komatsu Midi Excavator

Source: https://www.komatsu.eu/de/alte-modelle/kompaktbagger/pc95r-2

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Komatsu Midi Excavator series from Komatsu includes the PC95R-2. The engine delivers 61.5 kW, has 4 cylinders, with a displacement of 4,413 cm³. Torque is 310.1 Nm. Rated speed is 2,200 rpm. The unladen weight is 8,750 kg. Maximum torque is reached at 1,500 rpm. The pump delivers 180.2 l/min. The electrical system runs on 12 V. The engine fitted is the 4D106-1FB. The Komatsu Midi Excavator series covers 21 models. Rated output within it ranges from 28.2 to 62.6 kW; the PC95R-2 sits at the top of that range with 61.5 kW. Its immediate neighbours are the PC75-1 below it with 51 kW and the PC95MR-2 above it with 62.6 kW. 1159 Komatsu models across 39 series are on record. The model is listed under Excavators & compaction. 11 verified figures from 1 source are on file.

Technical data

Engine

Engine model4D106-1FBcorrect
Power61.5 kWcorrect
Rated speed2,200 rpmcorrect
Torque310.1correct
Speed at max. torque1,500 rpmcorrect
Cylinders4correct
Displacement4,413 cm³correct

Dimensions and weights

Unladen weight8,750 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Pump flow180.2 l/mincorrect

Other data

Height2,700.5correct

Where this model stands

Power-to-weight ratio: 7 kW/t (62 kW / 8.8 t)

Stronger than 19% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Komatsu PC95R-2 have?

The Komatsu PC95R-2 delivers 61.5 kW.

How much does the Komatsu PC95R-2 weigh?

The unladen weight is 8,750 kg.

What engine does the Komatsu PC95R-2 have?

4 cylinders, 4,413 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

PC130-8

PC160LC-8

PC40 MRx

PC40MR-2

PC45MR-3

PC45R-8

PC50MR-2

PC55MR-3

PC58UU-3

PC60-1

PC60-7

PC60L-1

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare