Start › Excavators & compaction › Komatsu › PC60L-1

Komatsu PC60L-1

Series: Komatsu Midi Excavator

Source: https://www.kleinanzeigen.de/s-anzeige/komatsu-pc55mr-3-5-5t

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The PC60L-1 from Komatsu is part of the Komatsu Midi Excavator series. The engine delivers 50.7 hp (37.3 kW), with a displacement of 3,293.8 cm³. The unladen weight is 6,700 kg. Ground clearance is 402.3 mm. The tank holds 110.2 litres. The pump delivers 132.1 l/min. The hydraulic tank holds 120.4 litres. Working pressure is 171.7 bar. The engine fitted is the 4D94. The Komatsu Midi Excavator series covers 21 models. Rated output within it ranges from 39.9 to 69.3 hp; the PC60L-1 sits in the lower part of that range with 50.7 hp. Its immediate neighbours are the PC45R-8 below it with 44.7 hp and the PC60-7 above it with 54.4 hp. 1159 Komatsu models across 39 series are on record. The model is listed under Excavators & compaction. 11 verified figures from 1 source are on file.

Technical data

Engine

Engine model4D94correct
Power50.7 hp (37.3 kW)correct
Displacement3,293.8 cm³correct

Dimensions and weights

Ground clearance402.3correct
Unladen weight6,700 kgcorrect

Working data

Pump flow132.1 l/mincorrect
Hydraulic oil capacity120.4 lcorrect
Hydraulic pressure171.7 barcorrect
Fuel tank capacity110.2 lcorrect

Other data

Height2,487.2correct

Where this model stands

Power-to-weight ratio: 5.6 kW/t (37 kW / 6.7 t)

Stronger than 7% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Komatsu PC60L-1 have?

The Komatsu PC60L-1 delivers 50.7 hp.

How much does the Komatsu PC60L-1 weigh?

The unladen weight is 6,700 kg.

What engine does the Komatsu PC60L-1 have?

3,294 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

PC130-8

PC160LC-8

PC40 MRx

PC40MR-2

PC45MR-3

PC45R-8

PC50MR-2

PC55MR-3

PC58UU-3

PC60-1

PC60-7

PC75-1

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare