Start › Excavators & compaction › Komatsu › PC88MR-8

Komatsu PC88MR-8

Series: Komatsu Midi Excavator

Source: https://www.komatsu.eu/de/alte-modelle/kompaktbagger/pc88mr-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Komatsu PC88MR-8 is a model in the Komatsu Midi Excavator series. The engine has 4 cylinders, with a displacement of 3,261 cm³. Rated speed is 1,950 rpm. The unladen weight is 8,225 kg. Ground clearance is 737.6 mm. The engine fitted is the SAA4D95LE-5. The Komatsu Midi Excavator series covers 21 models. Unladen weight within it ranges from 4,670 to 16,680 kg; the PC88MR-8 sits in the lower part of that range with 8,225 kg. Its immediate neighbours are the PC78UU-8 below it with 7,960 kg and the PC78MR-6 above it with 8,270 kg. 1159 Komatsu models across 39 series are on record. The model is listed under Excavators & compaction. 8 verified figures from 1 source are on file.

Technical data

Engine

Engine modelSAA4D95LE-5correct
Rated speed1,950 rpmcorrect
Cylinders4correct
Displacement3,261 cm³correct
AspirationTurbocharged, and air-to-air aftercooledcorrect

Dimensions and weights

Length6,175.2correct
Ground clearance737.6correct
Unladen weight8,225 kgcorrect

Frequently asked questions

How much does the Komatsu PC88MR-8 weigh?

The unladen weight is 8,225 kg.

What engine does the Komatsu PC88MR-8 have?

4 cylinders, 3,261 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

PC130-8

PC160LC-8

PC40 MRx

PC40MR-2

PC45MR-3

PC45R-8

PC50MR-2

PC55MR-3

PC58UU-3

PC60-1

PC60-7

PC60L-1

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare