Komatsu PC8000

Series: Komatsu Shovel

Wikimedia Commons · CC BY-SA 4.0 · Bahnfrend · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Komatsu PC8000 is a model in the Komatsu Shovel series. The engine delivers 2,997.7 kW, has 16 cylinders. Rated speed is 1,800 rpm. The electrical system runs on 24 V. The engine fitted is the 2 x SDA16V160. The Komatsu Shovel series covers 20 models. Rated output within it ranges from 196.1 to 2,997.7 kW; the PC8000 sits at the top of that range with 2,997.7 kW. Its immediate neighbours are the H655S below it with 2,769.5 kW. 1159 Komatsu models across 39 series are on record. The model is listed under Excavators & compaction. 6 verified figures from 1 source are on file.

Technical data

Engine

Engine model2 x SDA16V160correct
Power2,997.7 kWcorrect
Rated speed1,800 rpmcorrect
Cylinders16correct
Aspirationturbocharged and aftercooledcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Frequently asked questions

How much power does the Komatsu PC8000 have?

The Komatsu PC8000 delivers 2,998 kW.

What engine does the Komatsu PC8000 have?

16 cylinders.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare