Komatsu PC5500

Series: Komatsu Shovel

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the PC5500, Komatsu offers a model from the Komatsu Shovel series. The engine delivers 2,555 hp. Rated speed is 1,800 rpm. Ground clearance is 995.2 mm. The oil fill is 378.5 litres. The electrical system runs on 24 V. The engine fitted is the 2x SSA12V159. The Komatsu Shovel series covers 20 models. Rated output within it ranges from 266.6 to 2,555 hp; the PC5500 sits at the top of that range with 2,555 hp. Its immediate neighbours are the PC2000-8 below it with 989.5 hp. 1159 Komatsu models across 39 series are on record. The model is listed under Excavators & compaction. 7 verified figures from 1 source are on file.

Technical data

Engine

Engine model2x SSA12V159correct
Power2,555 hpcorrect
Rated speed1,800 rpmcorrect
Aspirationturbocharged and aftercooledcorrect
Engine oil capacity378.5 lcorrect

Dimensions and weights

Ground clearance995.2correct

Drivetrain and chassis

System voltage24 Vcorrect

Frequently asked questions

How much power does the Komatsu PC5500 have?

The Komatsu PC5500 delivers 2,555 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare