Start › Excavators & compaction › Komatsu › PC80-1

Komatsu PC80-1

Series: Komatsu Midi Excavator

Source: https://www.komatsu.eu/de/hydraulikbagger/kompaktbagger/pc80

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Komatsu Midi Excavator series from Komatsu includes the PC80-1. The engine delivers 60.8 hp (44.7 kW), with a displacement of 4,329.5 cm³. Torque is 245.1 Nm. The unladen weight is 7,700 kg. Ground clearance is 451.1 mm. The tank holds 120.4 litres. The pump delivers 262.3 l/min. The hydraulic tank holds 140.1 litres. Working pressure is 205.9 bar. The engine fitted is the 4D105. The Komatsu Midi Excavator series covers 21 models. Rated output within it ranges from 39.9 to 69.3 hp; the PC80-1 sits in the upper part of that range with 60.8 hp. Its immediate neighbours are the PC60-7 below it with 54.4 hp and the PC75-1 above it with 69.3 hp. 1159 Komatsu models across 39 series are on record. The model is listed under Excavators & compaction. 12 verified figures from 1 source are on file.

Technical data

Engine

Engine model4D105correct
Power60.8 hp (44.7 kW)correct
Torque245.1correct
Displacement4,329.5 cm³correct

Dimensions and weights

Ground clearance451.1correct
Unladen weight7,700 kgcorrect

Working data

Pump flow262.3 l/mincorrect
Hydraulic oil capacity140.1 lcorrect
Hydraulic pressure205.9 barcorrect
Fuel tank capacity120.4 lcorrect

Other data

Height2,627.4correct

Where this model stands

Power-to-weight ratio: 5.8 kW/t (45 kW / 7.7 t)

Stronger than 14% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Komatsu PC80-1 have?

The Komatsu PC80-1 delivers 60.8 hp.

How much does the Komatsu PC80-1 weigh?

The unladen weight is 7,700 kg.

What engine does the Komatsu PC80-1 have?

4,330 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

PC130-8

PC160LC-8

PC40 MRx

PC40MR-2

PC45MR-3

PC45R-8

PC50MR-2

PC55MR-3

PC58UU-3

PC60-1

PC60-7

PC60L-1

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare