Technical register for agricultural, construction and commercial machinery · sourced data
Start › Mining equipment › Komatsu › 960E-1

Komatsu 960E-1

Series: Komatsu Rock Truck

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 960E-1, Komatsu offers a model from the Komatsu Rock Truck series. The engine delivers 3,548.6 hp (2,495 kW), has 18 cylinders, with a displacement of 78,000.8 cm³. Rated speed is 1,900 rpm. The machine is 7,370 mm high. The wheelbase measures 8,741.7 mm. Ground clearance is 1,021.1 mm. Top speed is 64.5 km/h. The hydraulic tank holds 1,325.3 litres. The oil fill is 341.1 litres. The electrical system runs on 24 V. The engine fitted is the SSDA18V170. Tyre size: 56/80 R63. The Komatsu Rock Truck series covers 35 models. Rated output within it ranges from 233.2 to 3,548.6 hp; the 960E-1 sits at the top of that range with 3,548.6 hp. Its immediate neighbours are the 830E below it with 2,392.7 hp. 1218 Komatsu models across 47 series are on record.

Komatsu Rock Truck HD785 to 960E: rigid haulers split between mechanical and electric drive, 171 to 2,495 kW, 6 to 18 cylinders

At Komatsu, "HD" marks the classic rigid-frame dump trucks with mechanical drivetrains, while the model number indicates payload class: the HD785 carries a manufacturer-rated payload of 92.2 tonnes. Models with the "E" suffix, such as the 830E, 930E and 960E, use diesel-electric drive instead – the diesel engine powers a generator that feeds two wheel motors on the rear axle through cabling, with no mechanical transmission.

Read on 4 more paragraphs

The number after the dash, as in 730E-7 versus 730E-8, marks the build generation. The "Komatsu Rock Truck" bucket here groups 35 live-listed models across both drive types, from smaller rigid HD haulers to the largest electric-drive trucks.

The technical spread is wide: among 33 models with recorded displacement, values run from 12,175 to 78,000 cm³, and cylinder count among 25 models spans 6 to 18 – figures consistent with the huge drive engines used in electric haulers. Among 19 models with recorded power, output ranges from 171 to 2,495 kW.

Buying used, operating hours and the engine's service history matter most; on diesel-electric models, also check the traction alternator and wheel motors. Models such as 830E, HD780, 730E-8 and 930E-4 appear across the listed inventory.

Generation (the dash number), drive type (the E suffix or its absence) and payload class (the model number) together make up the full code of a Komatsu haul truck.

Sources: Kennwerte der Modelle Komatsu Rock Truck, – Komatsu Muldenkipper HD785-8 (Nenn-Nutzlast 92,2 t), Komatsu 830E (dieselelektrischer Antrieb) (Wikipedia)

Technical data

Engine

Engine modelSSDA18V170correct
EngineKomatsu SSDA18V170Arrangement: V18Power: 3500 hp MWcorrect
Power3,548.6 hp (2,495 kW)correct
Rated speed1,900 rpmcorrect
Cylinders18correct
Displacement78,000.8 cm³correct
Engine oil capacity341.1 lcorrect

Dimensions and weights

Length15,602.7correct
Height7,370 mmcorrect
Wheelbase8,741.7correct
Ground clearance1,021.1correct

Drivetrain and chassis

GearboxGE GTA-39 alternator with (2) GE GDY108 induction traction motorscorrect
Gearbox typeAuto ECPCcorrect
Tyre size56/80 R63correct
Top speed64.5 km/hcorrect

Working data

Hydraulic oil capacity1,325.3 lcorrect

Other data

System voltage24 Vcorrect

More machines with this engine (SSDA18V170, 4)

Frequently asked questions

How much power does the Komatsu 960E-1 have?

The Komatsu 960E-1 delivers 3,549 hp.

What engine does the Komatsu 960E-1 have?

18 cylinders, 78,001 cm³ displacement.

How fast does the Komatsu 960E-1 go?

Top speed is 64.5 km/h.

What are the dimensions of the Komatsu 960E-1?

15,603 mm × 7,370 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare