Junge SAHN-T 5/2
Built: 1998-1998 · Series: Other models
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Junge Fahrzeugbau – other models: the collective page of semi-trailers and tipper trailers outside the named ranges, from ZKO-10T to ZPPX-M070, gross weight 6,000 to 10,500 kg
Junge Fahrzeugbau of Hagenow builds semi-trailers and tipper trailers; this page gathers the models outside the named ranges. Designations such as ZKO-10T point with the number 10 to the 10-tonne weight class, ZNST11P061, ZNSX11P and APSX11P072 stand for further versions of the same construction group, while SAHN-T 5/2 and ZPPX-M070 add further individual models to the range.
Read on 3 more paragraphs
The register lists here 7 versions with unladen weights from 3,075 to 3,875 kg, gross weights from 6,000 to 10,500 kg, lengths from 8,030 to 10,650 mm and a constant width of 2,550 mm.
With gross weights up to a little over 10 tonnes, the range sits on the boundary between trailer classes O3 and O4 and is used as a tipper or semi-trailer in building-materials and agricultural transport, where the uniform width of 2.55 m makes full use of the permitted road width. The narrow band of unladen weights from about 3.1 to 3.9 tonnes points to a fairly uniform frame construction across the whole range.
On used tipper trailers, the tightness and condition of the body, the operation of the tipping hydraulics and side-panel locking, the frame and welds, and axles and brakes count; spare parts for hydraulic cylinders and axles run through the manufacturer and commercial-vehicle specialists. At the periodic inspection, wear on the body and leaks in the hydraulics are common points of attention on tipper trailers.
Technical data
Dimensions and weights
| Length | 10,650 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 8,400 mmcorrect |
| Unladen weight | 3,220 kgcorrect |
| Gross vehicle weight | 6,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Junge SAHN-T 5/2 weigh?
The unladen weight is 3,220 kg.
What is the gross vehicle weight of the Junge SAHN-T 5/2?
6,000 kg.
Up to what speed is the Junge SAHN-T 5/2 approved?
Approved up to 100 km/h.
What are the dimensions of the Junge SAHN-T 5/2?
10,650 mm × 2,550 mm.
When was the Junge SAHN-T 5/2 built?
Production years: 1998.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.