StartTractorsJohn Deere › 3440

John Deere 3440

Built: 1979-1982 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The John Deere 3440 rolled off the line in 1979-1982 as a tractor. It is powered by a six-cylinder engine producing 76 kW.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 10 to 420 kW; with 76 kW, the 3440 sits in the mid-field. Directly alongside are the 5090G with 75 kW below and the 6090RC with 77 kW above.

Technical data

Engine

Engine makeJohn Deerecorrect
Engine model6-359 DJ-01, 6correct
Fueldieselcorrect
Power102 hp (76 kW)correct
Cylinders6correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Drivefour-wheel driveWDcorrect
Clutchdrycorrect

Working data

PTO speed540correct

Origin and approval

PlantGranadero Baigorria, Santa Fe, Argentinacorrect

Frequently asked questions

How much power does the John Deere 3440 have?

The John Deere 3440 delivers 102 hp.

What engine does the John Deere 3440 have?

6 cylinders, Diesel.

When was the John Deere 3440 built?

Production years: 1979-1982.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare