John Deere 3310
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The John Deere 3310 is a tractor made by John Deere. The engine produces 56 kW.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 10 to 420 kW; with 56 kW, the 3310 sits in the lower third. Directly alongside are the 5075E with 55 kW below and the 6110 SE with 59 kW above.
Technical data
Engine
| Engine make | John Deerecorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 75 hp (56 kW)correct |
| Displacement | 4.530 cm³correct |
| Stroke | 106, 5 xcorrect |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWD/MFWDcorrect |
|---|
Origin and approval
| Plant | Francecorrect |
|---|
Other data
| Abmessungen länge | 4.060 mmcorrect |
|---|---|
| Anzahl zylinder | 4 Leistungcorrect |
| Deere modellreihe | 3010ercorrect |
| Drehmoment bei motordrehzahl | 284 Nmcorrect |
| Eigengewicht | 3.425 kgcorrect |
| Füllmengenbearbeiten kraftstofftank | 115 Litercorrect |
| Gesamtstückzahl | XXXcorrect |
| Getriebebearbeiten synchrongetriebe | 20/correct |
| Höchstgeschwindigkeit | 40 km/hcorrect |
| Höhe | 2.540 mmcorrect |
| Kraftheber-hubkraft | 4.030 kgcorrect |
| Leistung bei nenndrehzahl | 55 kWcorrect |
| Lenkung einschlagwinkel | 55°correct |
| Nachlaufwinkel | 6°correct |
| Pumpe-fördermenge | 52 L/mincorrect |
| Radstand | 2.400 mmcorrect |
| Reihe modell | 3310 Motorcorrect |
| U/min hubraum | 4, 5 Litercorrect |
| Verbrauchbearbeiten kabinebearbeiten geräuschpegel | 83 dBcorrect |
| X-kabine | 74 dBcorrect |
| X.xxx mm höhe | 2.540 mmcorrect |
| Zapfwellebearbeiten bauart | 540 /correct |
Frequently asked questions
How much power does the John Deere 3310 have?
The John Deere 3310 delivers 75 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 32 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.