John Deere 3032 E
Built: 2008-2008 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The John Deere 3032 E is a tractor built in 2008. It is powered by a three-cylinder engine producing 23 kW. Rated power is reached at 2,400 rpm.
It runs with MFWD.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 10 to 420 kW; with 23 kW, the 3032 E sits at the bottom end. Directly alongside are the 1545 Series II with 22.7 kW below and the 3320 HST with 23.1 kW above.
Technical data
Engine
| Engine make | Yanmarcorrect |
|---|---|
| Engine model | 3TNV88correct |
| Fuel | dieselcorrect |
| Power | 31 hp (23 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 97.6 cu incorrect |
| Bore | 3.5 in (88,9 mm)correct |
| Stroke | 3.54 in (89,9 mm)correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Wheelbase | 60 in (1 524 mm)correct |
|---|---|
| Unladen weight | 2,175 lbs (986,6 kg)correct |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Working data
| Lifting capacity | 1,356 lbs (615,1 kg)correct |
|---|---|
| Fuel tank capacity | 6.4 galcorrect |
| PTO speed | 540correct |
| Linkage category | Cat Icorrect |
Origin and approval
| Plant | Grovetown, Georgia, USAcorrect |
|---|
Frequently asked questions
How much power does the John Deere 3032 E have?
The John Deere 3032 E delivers 31 hp.
What engine does the John Deere 3032 E have?
3 cylinders, Diesel.
When was the John Deere 3032 E built?
Production years: 2008.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.