StartTractorsJohn Deere › 9530 Scraper

John Deere 9530 Scraper 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The John Deere 9530 Scraper is a tractor from the John Deere 4WD Tractor series. Power comes from a six-cylinder engine; from 13.5 litres it draws 431 hp (316.9 kW). Rated speed is 2,100 rpm.

Within the range, rated power spans from 50.7 to 568 hp; with 431 hp, the 9530 Scraper sits in the upper third. Directly alongside are the 9410R with 416 hp below and the 9520 with 456 hp above.

Technical data

Engine

Engine modelPowerTech Pluscorrect
Power430.9 hp (316.9 kW)correct
Rated speed2,100 rpmcorrect
Cylinders6correct
Displacement13,501.3 cm³correct
Aspirationturbocharged, air-to-air aftercoolingcorrect
Coolant capacity53.4 lcorrect
Engine oil capacity41.6 lcorrect

Drivetrain and chassis

Gearbox type18-speed powershift transmissioncorrect
Forward gears18correct
Reverse gears6correct
Tyre size710/70 R38correct
System voltage12 Vcorrect

Working data

Pump flow181.7 l/mincorrect
Hydraulic oil capacity102.2 lcorrect
Hydraulic pressure199.9correct
Fuel tank capacity1,325.3 lcorrect

Frequently asked questions

How much power does the John Deere 9530 Scraper have?

The John Deere 9530 Scraper delivers 431 hp.

What engine does the John Deere 9530 Scraper have?

6 cylinders, 13,501 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare