StartWheel loadersJohn Deere › 850D

John Deere 850D

Series: John Deere Crawler Loader

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 850D from John Deere is part of the John Deere Crawler Loader series. The engine delivers 37.3 kW, with a displacement of 2,933.3 cm³. The unladen weight is 5,624.5 kg. The tank holds 83.3 litres. The pump delivers 87.1 l/min. The hydraulic tank holds 37.9 litres. Working pressure is 155.1 bar. The cooling system holds 12.5 litres. The electrical system runs on 12 V. The engine fitted is the e 3-179D. The John Deere Crawler Loader series covers 19 models. Rated output within it ranges from 31.3 to 149.1 kW; the 850D sits at the bottom of that range with 37.3 kW. Its immediate neighbours are the 355D below it with 35.8 kW and the 450B above it with 48.5 kW. 2153 John Deere models across 96 series are on record. The model is listed under Wheel loaders. 12 verified figures from 1 source are on file.

Technical data

Engine

Engine modele 3-179Dcorrect
Power37.3 kWcorrect
Displacement2,933.3 cm³correct
Aspiration4-stroke cycle, naturally aspirated dieselcorrect
Coolant capacity12.5 lcorrect

Dimensions and weights

Unladen weight5,624.5 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Pump flow87.1 l/mincorrect
Hydraulic oil capacity37.9 lcorrect
Hydraulic pressure155.1correct
Fuel tank capacity83.3 lcorrect

Other data

Height2,310.4correct

Where this model stands

Power-to-weight ratio: 6.6 kW/t (37 kW / 5.6 t)

Stronger than 7% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 850D have?

The John Deere 850D delivers 37.3 kW.

How much does the John Deere 850D weigh?

The unladen weight is 5,624 kg.

What engine does the John Deere 850D have?

2,933 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare