Start › Wheel loaders › John Deere › 455G

John Deere 455G

Series: John Deere Crawler Loader

The photo shows the 605K from the same series. Source: https://www.deere.com.au/en/product-selector-landing/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 455G, John Deere offers a model from the John Deere Crawler Loader series. The engine delivers 52.2 kW, has 4 cylinders, with a displacement of 4,522.8 cm³. Torque is 309.1 Nm. Rated speed is 2,100 rpm. The unladen weight is 8,502.6 kg. Ground clearance is 332.2 mm. Top speed is 9.5 km/h. The tank holds 155.2 litres. Maximum torque is reached at 1,300 rpm. The pump delivers 117.3 l/min. The hydraulic tank holds 68.1 litres. Working pressure is 179.3 bar. The cooling system holds 17 litres. The oil fill is 8.7 litres. The electrical system runs on 12 V. The engine fitted is the 4045T. The John Deere Crawler Loader series covers 19 models. Rated output within it ranges from 31.3 to 149.1 kW; the 455G sits in the lower part of that range with 52.2 kW. Its immediate neighbours are the 455D below it with 50 kW and the 555G above it with 67.1 kW. 2153 John Deere models across 96 series are on record. The model is listed under Wheel loaders. 19 verified figures from 1 source are on file.

Technical data

Engine

Engine model4045Tcorrect
Power52.2 kWcorrect
Rated speed2,100 rpmcorrect
Torque309.1correct
Speed at max. torque1,300 rpmcorrect
Cylinders4correct
Displacement4,522.8 cm³correct
Aspirationturbochargedcorrect
Coolant capacity17 lcorrect
Engine oil capacity8.7 lcorrect

Dimensions and weights

Ground clearance332.2correct
Unladen weight8,502.6 kgcorrect

Drivetrain and chassis

Top speed9.5 km/hcorrect
System voltage12 Vcorrect

Working data

Pump flow117.3 l/mincorrect
Hydraulic oil capacity68.1 lcorrect
Hydraulic pressure179.3correct
Fuel tank capacity155.2 lcorrect

Other data

Cab height2,770.6correct

More machines with this engine (John Deere 4045T, 60)

Where this model stands

Power-to-weight ratio: 6.1 kW/t (52 kW / 8.5 t)

Stronger than 20% of the wheel loaders in the register — out of 1,252 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 455G have?

The John Deere 455G delivers 52.2 kW.

How much does the John Deere 455G weigh?

The unladen weight is 8,503 kg.

What engine does the John Deere 455G have?

4 cylinders, 4,523 cm³ displacement.

How fast does the John Deere 455G go?

Top speed is 9.5 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

350B

350C

355D

450B

450C

455D

555G

605C

605K

655B

655C

655C Series II

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare