John Deere 5603 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | 5,603correct |
|---|---|
| Fuel | dieselcorrect |
| Rated speed | 2.400/mincorrect |
| Cylinders | 4 Hubraumcorrect |
| Displacement | 4,522.8 cm³correct |
| Aspiration | turbochargedcorrect |
Drivetrain and chassis
| Gearbox type | Power Reversercorrect |
|---|---|
| Forward gears | 12correct |
| Reverse gears | 12correct |
Working data
| Pump flow | 60.2 l/mincorrect |
|---|---|
| Fuel tank capacity | 126.8 lcorrect |
Other data
| Antrieb antriebstyp | all-wheel drivecorrect |
|---|---|
| Baureihe modell | 5603 Bauweisecorrect |
| Breite | 1.880 mmcorrect |
| Deere modellreihe | 5003ercorrect |
| Drehmomentanstieg | 39, 9 %correct |
| Getriebe | 12V/correct |
| Gruppen | A-Bcorrect |
| Höchstgeschwindigkeit | 40 km/hcorrect |
| Höhe | 2.510 mmcorrect |
| Kühlsystem | water-cooledcorrect |
| Länge | 3.740 mmcorrect |
| Maße eigengewicht | 3.320 kgcorrect |
| Motor nennleistung | 72, 9 kWcorrect |
| Radstand | 2.177 mmcorrect |
| Typ | 4.045, stehendercorrect |
Frequently asked questions
What engine does the John Deere 5603 have?
4,523 cm³ displacement, Diesel.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 26 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.