John Deere 5083E Limited MFWD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the John Deere 5083E Limited belongs to the John Deere MFWD Tractor series. Under the bonnet works a four-cylinder engine displacing 4.5 litres, producing 84 hp (61.9 kW). Rated output is reached at 2,400 rpm, so it works in the lower rev range.
Unladen weight is 3,372 kg. Wheelbase is 2.18 m.
Within the range, rated power spans from 64.9 to 335 hp; with 84.2 hp, the 5083E Limited sits at the bottom end. Directly alongside are the 85F Open Station with 83.7 hp below and the 6215 with 91.2 hp above.
Technical data
Engine
| Engine model | 4,045correct |
|---|---|
| Power | 84.2 hp (61.9 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,522.8 cm³correct |
| Aspiration | turbochargedcorrect |
Dimensions and weights
| Wheelbase | 2,179.3correct |
|---|---|
| Ground clearance | 401.3correct |
| Unladen weight | 3,372 kgcorrect |
Drivetrain and chassis
| Gearbox type | PowrReversercorrect |
|---|---|
| Forward gears | 12correct |
| Reverse gears | 12correct |
Working data
| Pump flow | 85.2 l/mincorrect |
|---|---|
| Fuel tank capacity | 126.8 lcorrect |
Where this model stands
Power-to-weight ratio: 18.4 kW/t (62 kW / 3.4 t)
Power class: Universal (40–100 hp)
Stronger than 59% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the John Deere 5083E Limited have?
The John Deere 5083E Limited delivers 84.2 hp.
How much does the John Deere 5083E Limited weigh?
The unladen weight is 3,372 kg.
What engine does the John Deere 5083E Limited have?
4 cylinders, 4,523 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.