Start › Wheel loaders › John Deere › 444C

John Deere 444C

Series: John Deere Wheel Loader

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 444C, John Deere offers a model from the John Deere Wheel Loader series. The engine delivers 96.3 hp (63.4 kW), has 6 cylinders, with a displacement of 5,391.3 cm³. Torque is 309.1 Nm. Rated speed is 2,400 rpm. The unladen weight is 8,806 kg. The wheelbase measures 2,401.8 mm. Ground clearance is 393.2 mm. The tank holds 151.4 litres. The gearbox has 4 forward gears. There are also 2 reverse gears. Maximum torque is reached at 1,200 rpm. The pump delivers 151 l/min. The hydraulic tank holds 53.4 litres. The cooling system holds 23.8 litres. The electrical system runs on 12 V. Tyre size: 15,5-25. The John Deere Wheel Loader series covers 120 models. Rated output within it ranges from 55.8 to 286.9 hp; the 444C sits in the lower part of that range with 96.3 hp. Its immediate neighbours are the 324H below it with 85.2 hp and the 444D above it with 98.3 hp. 2153 John Deere models across 96 series are on record. The model is listed under Wheel loaders. 21 verified figures from 1 source are on file.

Technical data

Engine

Power96.3 hp (63.4 kW)correct
Rated speed2,400 rpmcorrect
Torque309.1correct
Speed at max. torque1,200 rpmcorrect
Cylinders6correct
Displacement5,391.3 cm³correct
AspirationNaturalcorrect
Coolant capacity23.8 lcorrect

Dimensions and weights

Wheelbase2,401.8correct
Ground clearance393.2correct
Unladen weight8,806 kgcorrect

Drivetrain and chassis

Gearbox typePower Shiftcorrect
Forward gears4correct
Reverse gears2correct
Tyre size15.5-25correct
System voltage12 Vcorrect

Working data

Pump flow151 l/mincorrect
Hydraulic oil capacity53.4 lcorrect
Fuel tank capacity151.4 lcorrect

Other data

Height2,980.9correct

Where this model stands

Power-to-weight ratio: 7.2 kW/t (63 kW / 8.8 t)

Stronger than 32% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 444C have?

The John Deere 444C delivers 96.3 hp.

How much does the John Deere 444C weigh?

The unladen weight is 8,806 kg.

What engine does the John Deere 444C have?

6 cylinders, 5,391 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

204L

210LE

244E

244H

244J

244K-II

304H Waste Handler

304J

304L

324H

324J

324K

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare