John Deere 3203 Utility
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The John Deere 3203 is a tractor made by John Deere. Under the bonnet works a three-cylinder engine displacing 1.5 litres, producing 32 hp (23.9 kW). Rated power arrives at 2,800 rpm — the engine pulls from low down rather than needing to be revved.
Wheelbase is 1.73 m.
Within the range, rated power spans from 24.3 to 507 hp; with 32.4 hp, the 3203 sits in the lower third. Directly alongside are the Dain Tractor with 24.3 hp below and the 3720 with 44.6 hp above.
Technical data
Engine
| Engine model | 3TNV84correct |
|---|---|
| Power | 32.4 hp (23.9 kW)correct |
| Rated speed | 2,800 rpmcorrect |
| Torque | 75.4correct |
| Speed at max. torque | 2,800 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,501.1 cm³correct |
| Aspiration | naturalcorrect |
| Coolant capacity | 5.7 lcorrect |
| Engine oil capacity | 4.5 lcorrect |
Dimensions and weights
| Wheelbase | 1,728.2correct |
|---|
Drivetrain and chassis
| Gearbox type | hydro 2-rangecorrect |
|---|---|
| System voltage | 12 Vcorrect |
Working data
| Pump flow | 50.7 l/mincorrect |
|---|---|
| Fuel tank capacity | 43.5 lcorrect |
Frequently asked questions
How much power does the John Deere 3203 have?
The John Deere 3203 delivers 32.4 hp.
What engine does the John Deere 3203 have?
3 cylinders, 1,501 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.