StartBackhoe loadersJohn Deere › 302A

John Deere 302A

Series: John Deere Loader Backhoe

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 302A from John Deere is part of the John Deere Loader Backhoe series. The engine delivers 52.7 hp (37.3 kW), has 3 cylinders, with a displacement of 2,700.6 cm³. The engine comes from John Deere. Rated speed is 2,500 rpm. The wheelbase measures 1,950.7 mm. Ground clearance is 301.8 mm. The tank holds 73.8 litres. The gearbox has 8 forward gears. There are also 8 reverse gears. Maximum torque is reached at 1,300 rpm. The pump delivers 106 l/min. The hydraulic tank holds 37.9 litres. Working pressure is 162 bar. The cooling system holds 11.7 litres. The electrical system runs on 12 V. The John Deere Loader Backhoe series covers 57 models. Rated output within it ranges from 43.6 to 121.7 hp; the 302A sits at the bottom of that range with 52.7 hp. Its immediate neighbours are the 110 TLB below it with 43.6 hp and the 210C above it with 58.8 hp. 2153 John Deere models across 96 series are on record. The model is listed under Wheel loaders. 18 verified figures from 1 source are on file.

Technical data

Engine

Engine makeJohn Deerecorrect
Power52.7 hp (37.3 kW)correct
Rated speed2,500 rpmcorrect
Speed at max. torque1,300 rpmcorrect
Cylinders3correct
Displacement2,700.6 cm³correct
Coolant capacity11.7 lcorrect

Dimensions and weights

Wheelbase1,950.7correct
Ground clearance301.8correct

Drivetrain and chassis

Gearbox typePower shuttlecorrect
Forward gears8correct
Reverse gears8correct
System voltage12 Vcorrect

Working data

Pump flow106 l/mincorrect
Hydraulic oil capacity37.9 lcorrect
Hydraulic pressure162correct
Fuel tank capacity73.8 lcorrect

Frequently asked questions

How much power does the John Deere 302A have?

The John Deere 302A delivers 52.7 hp.

What engine does the John Deere 302A have?

3 cylinders, 2,701 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Wheeled excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare