StartTractorsJohn Deere › 2520

John Deere 2520 Utility

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The John Deere 2520 is a tractor made by John Deere. 27 hp (19.8 kW) is what the three-cylinder engine gets out of 1.3 litres. Rated output is reached at 2,600 rpm, so it works in the lower rev range.

Wheelbase is 1.66 m.

Within the range, rated power spans from 24.3 to 507 hp; with 26.9 hp, the 2520 sits in the lower third. Directly alongside are the Dain Tractor with 24.3 hp below and the 3720 with 44.6 hp above.

Technical data

Engine

Engine model3TNV82Acorrect
Power26.9 hp (19.8 kW)correct
Rated speed2,600 rpmcorrect
Torque69.6correct
Speed at max. torque2,600 rpmcorrect
Cylinders3correct
Displacement1,330.6 cm³correct
Aspirationnaturalcorrect
Coolant capacity4.2 lcorrect
Engine oil capacity3 lcorrect

Dimensions and weights

Wheelbase1,655.1correct

Drivetrain and chassis

Gearbox typehydro- 2 rangecorrect
System voltage12 Vcorrect

Working data

Pump flow39.7 l/mincorrect
Fuel tank capacity27.3 lcorrect

Frequently asked questions

How much power does the John Deere 2520 have?

The John Deere 2520 delivers 26.9 hp.

What engine does the John Deere 2520 have?

3 cylinders, 1,331 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare