John Deere 2032R Utility
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the John Deere 2032R belongs to the John Deere Utility Tractor series. 32 hp (23.3 kW) is what the three-cylinder engine gets out of 1.6 litres.
Within the range, rated power spans from 21.3 to 58.8 hp; with 31.7 hp, the 2032R sits in the lower third. Directly alongside are the 3032E with 31.2 hp below and the 3033R with 32.2 hp above.
Technical data
Engine
| Engine model | 3TNV88C-NJTcorrect |
|---|---|
| Power | 31.7 hp (23.3 kW)correct |
| Cylinders | 3correct |
| Displacement | 1,643.6 cm³correct |
| Aspiration | Naturalcorrect |
Frequently asked questions
How much power does the John Deere 2032R have?
The John Deere 2032R delivers 31.7 hp.
What engine does the John Deere 2032R have?
3 cylinders, 1,644 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.