StartTelehandlersJCB › 527-58 AGRI

JCB 527-58 AGRI

Series: JCB Telescopic Forklift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The JCB 527-58 AGRI is a model in the JCB Telescopic Forklift series. The engine delivers 110.2 hp (81.1 kW), has 4 cylinders, with a displacement of 4,401.6 cm³. The engine comes from JCB. Torque is 440.1 Nm. Rated speed is 2,200 rpm. The wheelbase measures 2,612.1 mm. Ground clearance is 362.7 mm. Maximum torque is reached at 1,300 rpm. The engine fitted is the Agri Plus. The JCB Telescopic Forklift series covers 55 models. Rated output within it ranges from 45.3 to 146.9 hp; the 527-58 AGRI sits in the upper part of that range with 110.2 hp. Its immediate neighbours are the 550-170 below it with 101.4 hp and the 550-80 WASTEMASTER above it with 126.5 hp. 752 JCB models across 38 series are on record. The model is listed under Telehandlers. 12 verified figures from 1 source are on file.

JCB Loadall — the number before the dash is load, after it height

JCB telehandlers carry their key figures in the name. Before the dash stands the rated lift capacity, after it the lift height. A 525-60 lifts 2.5 tonnes to 6 metres; a 514-40 reaches 4 metres. Comparing two machines needs no data sheet — the designation says it.

Read on 3 more paragraphs

That makes the range unusually easy to read. A 531-70 lifts around 3.1 tonnes to 7 metres, a 541-70 a good 4 tonnes to the same height. The first number decides the load, the second the reach — and together they decide whether the machine suits the job.

A trailing T marks differing versions of the same size, as in the 531-T70 against the 531-70. Anyone sourcing parts or comparing offers should read that letter too; it separates variants that would otherwise read alike.

One thing stays important with any telehandler: rated capacity applies to a specific load centre and to the boom retracted. The further the boom extends, the less may hang from it. What a machine may actually lift in a given position is in the load chart — not in the type designation.

Sources: JCB 525-60 Datenblatt, profi: JCB 514-40, JCB Loadall-Übersicht

Technical data

Engine

Engine makeJCBcorrect
Engine modelAgri Pluscorrect
Power110.2 hp (81.1 kW)correct
Rated speed2,200 rpmcorrect
Torque440.1correct
Speed at max. torque1,300 rpmcorrect
Cylinders4correct
Displacement4,401.6 cm³correct
AspirationTurbocharged cooledcorrect

Dimensions and weights

Height2,150 mmcorrect
Wheelbase2,612.1correct
Ground clearance362.7correct

Drivetrain and chassis

Top speed30 km/hcorrect

Working data

Lift height5,800 mmcorrect

Frequently asked questions

How much power does the JCB 527-58 AGRI have?

The JCB 527-58 AGRI delivers 110 hp.

What engine does the JCB 527-58 AGRI have?

4 cylinders, 4,402 cm³ displacement.

How fast does the JCB 527-58 AGRI go?

Top speed is 30 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare