StartTelehandlersJCB › 426ZX

JCB 426ZX

Series: JCB Integrated Tool Carrier

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The JCB 426ZX belongs to the JCB Integrated Tool Carrier series. The engine delivers 167.3 hp (113.3 kW), with a displacement of 6,700.7 cm³. Torque is 732.1 Nm. Rated speed is 2,200 rpm. The unladen weight is 13,229.9 kg. The wheelbase measures 3,002.3 mm. Ground clearance is 445 mm. The tank holds 230.9 litres. The gearbox has 4 forward gears. There are also 3 reverse gears. Maximum torque is reached at 1,400 rpm. The pump delivers 264.2 l/min. The hydraulic tank holds 208.2 litres. The cooling system holds 34.1 litres. The oil fill is 14 litres. The electrical system runs on 24 V. The engine fitted is the QB6,7. Tyre size: 20,5R25 XHA (L3). The JCB Integrated Tool Carrier series covers 37 models. Rated output within it ranges from 59.8 to 219 hp; the 426ZX sits in the upper part of that range with 167.3 hp. Its immediate neighbours are the 436S below it with 154.1 hp and the 436 AGRI above it with 179.5 hp. 752 JCB models across 38 series are on record. The model is listed under Telehandlers. 22 verified figures from 1 source are on file.

Technical data

Engine

Engine modelQB6.7correct
Power167.3 hp (113.3 kW)correct
Rated speed2,200 rpmcorrect
Torque732.1correct
Speed at max. torque1,400 rpmcorrect
Displacement6,700.7 cm³correct
AspirationTurbo-charged wastegatedcorrect
Coolant capacity34.1 lcorrect
Engine oil capacity14 lcorrect

Dimensions and weights

Wheelbase3,002.3correct
Ground clearance445correct
Unladen weight13,229.9 kgcorrect

Drivetrain and chassis

Gearbox typeSmooth shift powershift transmission ZF 4WG 160correct
Forward gears4correct
Reverse gears3correct
Tyre size20.5R25 XHA (L3)correct
System voltage24 Vcorrect

Working data

Pump flow264.2 l/mincorrect
Hydraulic oil capacity208.2 lcorrect
Fuel tank capacity230.9 lcorrect

Other data

Height3,337.6correct

Where this model stands

Power-to-weight ratio: 8.6 kW/t (113 kW / 13.2 t)

Stronger than 90% of the telehandlers in the register — out of 658 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the JCB 426ZX have?

The JCB 426ZX delivers 167 hp.

How much does the JCB 426ZX weigh?

The unladen weight is 13,230 kg.

What engine does the JCB 426ZX have?

6,701 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare