James 82D-4X4/2300
Built: 1986 · Series: Other models
More machines from model year 1986
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
James 82D-4X4/2300: a heavy four-wheel-drive tractor unit, a four-cylinder diesel of 3,860 cc, a 13,500 kg permissible gross weight and 5,070 kg unladen weight, built in 1986
The 82D-4X4/2300 is a heavy, four-wheel-drive tractor unit built in 1986. Its four-cylinder diesel engine of 3,860 cc and four-wheel drive point to a machine built for heavy towed loads and varied, including unpaved, ground, well beyond the scale of an ordinary field tractor.
Read on 3 more paragraphs
With a permissible gross weight of 13,500 kg and an unladen weight of 5,070 kg, the 82D-4X4/2300 sits in a weight class more usually seen on heavy tractor units used in forestry or construction-site logistics. Its width of 2,360 mm suits a wide, stable chassis for loads of this size.
Tractor units in this weight class with four-wheel drive are used where heavy trailers or fitted equipment must be moved over longer distances and across varied ground, such as in forestry or on construction sites. The large displacement per cylinder points to an engine built for high torque rather than high revs, exactly what heavy towing demands.
Buying a used, heavy four-wheel-drive tractor unit of this kind means paying the closest attention to the drive shafts, axle differentials and transfer gearbox, since these carry the greatest load under full pull. Given the high permissible gross weight, the braking system also deserves a thorough check. Parts for such a rare, heavy tractor unit are generally obtainable only through specialists.
Sources: SpecCodex-Register: Kennwerte des Modells 82D-4X4/2300
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 3,860 cm³correct |
Dimensions and weights
| Length | 12,000 mmcorrect |
|---|---|
| Width | 2,360 mmcorrect |
| Unladen weight | 5,070 kgcorrect |
| Gross vehicle weight | 13,500 kgcorrect |
Frequently asked questions
How much does the James 82D-4X4/2300 weigh?
The unladen weight is 5,070 kg.
What is the gross vehicle weight of the James 82D-4X4/2300?
13,500 kg.
What engine does the James 82D-4X4/2300 have?
4 cylinders, 3,860 cm³ displacement.
What are the dimensions of the James 82D-4X4/2300?
12,000 mm × 2,360 mm.
When was the James 82D-4X4/2300 built?
Production years: 1986.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
