Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks over 7.5 t › Iveco › AS440ST/P

Iveco AS440ST/P

Built: 2017-2026 · Series: AS440ST

More machines from model year 2017

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the AS440ST/P, Iveco offers a model from the AS440ST series. Production: 2017-2026. The engine delivers 338 kW, has 6 cylinders, with a displacement of 12,928 cm³. The machine is 7,360 mm long and 2,550 mm wide. The unladen weight is 8,518 kg. The wheelbase measures 4,900 mm. Top speed is 90 km/h. The gross vehicle weight is 24,000 kg. The machine runs on 6 wheels. The AS440ST series covers 10 models. Rated output within it ranges from 338 to 368 kW; the AS440ST/P sits at the bottom of that range with 338 kW. Its immediate neighbours are the AS440ST/FP above it with 357 kW. Unladen weight within it ranges from 6,770 to 8,700 kg; here the AS440ST/P sits at the top of that range with 8,518 kg. 3135 Iveco models across 106 series are on record.

Iveco AS440ST – heavy tractor unit of the 44-tonne class: six-cylinder engine of 12,882 to 12,937 cm³, 338 to 368 kW, diesel, LNG, CNG and electric drive

The Iveco AS440ST denotes the heavy tractor-unit series in the gross weight range around 44 tonnes. What stands out in the register entries is the drivetrain diversity within the same series: alongside diesel versions (/P, /FP), the register lists LNG and CNG gas variants as well as a fully battery-electric version (BEV) – Iveco has been among the pioneers of alternative drivetrains in heavy-duty transport for years with its gas-powered trucks.

Read on 3 more paragraphs

The register lists 10 versions here with 338 to 368 kW from six-cylinder engines of 12,882 to 12,937 cm³ displacement. Kerb weights range from 6,770 to 11,154 kg, gross vehicle weight from 18,000 to 28,000 kg, lengths from 6,100 to 7,600 mm, and the width is a uniform 2,550 mm.

As a tractor unit for long-haul transport, the AS440ST competes with the corresponding ranges from Mercedes-Benz, Scania and Volvo; the LNG and CNG variants target hauliers seeking lower CO2 and noise emissions in distribution and long-haul transport, the BEV version urban and short-distance use.

When buying used, the gas variants call for checking the condition of the pressure tanks and their inspection intervals, while all versions warrant checking the clutch, brakes and mileage of the drivetrain as well as corrosion on the frame and body mounts; spare parts and service run through the Iveco dealer network.

Sources: Kennwerte der Modelle Iveco AS440ST, Iveco

Technical data

Engine

Power338 kWcorrect
Cylinders6correct
Displacement12,928 cm³correct

Dimensions and weights

Length7,360 mmcorrect
Width2,550 mmcorrect
Wheelbase4,900 mmcorrect
Unladen weight8,518 kgcorrect
Gross vehicle weight24,000 kgcorrect

Drivetrain and chassis

Wheels6correct
Top speed90 km/hcorrect

Where this model stands

Power-to-weight ratio: 39.7 kW/t (338 kW / 8.5 t)

Stronger than 69% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iveco AS440ST/P have?

The Iveco AS440ST/P delivers 338 kW.

How much does the Iveco AS440ST/P weigh?

The unladen weight is 8,518 kg.

What is the gross vehicle weight of the Iveco AS440ST/P?

24,000 kg.

What engine does the Iveco AS440ST/P have?

6 cylinders, 12,928 cm³ displacement.

How fast does the Iveco AS440ST/P go?

Top speed is 90 km/h.

What are the dimensions of the Iveco AS440ST/P?

7,360 mm × 2,550 mm.

When was the Iveco AS440ST/P built?

Production years: 2017-2026.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare