StartTrucks over 7.5 tIveco › 65C18 VAN

Iveco 65C18 VAN

Built: 2008-2008 · Series: 65C18

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Iveco 65C18 VAN is a machine built by Iveco. Production: 2008. The engine delivers 130 kW, has 4 cylinders, with a displacement of 2,990 cm³. The machine is 7,050 mm long and 2,170 mm wide. The unladen weight is 3,020 kg. The gross vehicle weight is 6,500 kg. The gearbox offers 6 gears. Rated output across the Iveco range ranges from 60 to 419 kW; the 65C18 VAN sits in the lower part of that range with 130 kW. Its immediate neighbours are the 35S18/LA02 below it with 129 kW and the Daily above it with 132 kW. 2867 Iveco models across 23 series are on record. The model is listed under Trucks over 7.5 t. 9 verified figures from 1 source are on file.

Technical data

Engine

Power130 kWcorrect
Cylinders4correct
Displacement2,990 cm³correct

Dimensions and weights

Length7,050 mmcorrect
Width2,170 mmcorrect
Unladen weight3,020 kgcorrect
Gross vehicle weight6,500 kgcorrect

Drivetrain and chassis

Gears6correct

Where this model stands

Power-to-weight ratio: 43 kW/t (130 kW / 3 t)

Stronger than 17% of the trucks over 7.5 t in the register — out of 27,962 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iveco 65C18 VAN have?

The Iveco 65C18 VAN delivers 130 kW.

How much does the Iveco 65C18 VAN weigh?

The unladen weight is 3,020 kg.

What is the gross vehicle weight of the Iveco 65C18 VAN?

6,500 kg.

What engine does the Iveco 65C18 VAN have?

4 cylinders, 2,990 cm³ displacement.

What are the dimensions of the Iveco 65C18 VAN?

7,050 mm × 2,170 mm.

When was the Iveco 65C18 VAN built?

Production years: 2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare