Iveco 65C18 435
Built: 2009-2009 · Series: 65C18
More machines from model year 2009
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco 65C18 – Daily chassis of the 6.5-tonne class with twin rear tyres and about 180 hp: 129 to 130 kW, four-cylinders from 2,990 to 2,998 cm³, unladen weights from 3,020 to 6,100 kg, lengths up to 8,850 mm
The 65C18 follows the same logic as the 65C17 – 65 for the 6.5-tonne class, C for twin rear tyres – but carries the next power step of about 180 hp with the final number 18. The register versions range from the base 65C18 through chassis with different wheelbases (435, 4350, /375) to the EURO 4 emissions stage, partly in the long EURO 4 LD version, and a pure van body VAN and VAN/395.
Read on 3 more paragraphs
The register lists here 8 versions, 6 of them with recorded power of 129 to 130 kW, with displacements from 2,990 to 2,998 cm³ from four-cylinders, unladen weights from 3,020 to 6,100 kg at gross vehicle weights from 6,400 to 6,700 kg, lengths from 5,970 to 8,850 mm and widths from 2,170 to 2,550 mm.
With the stronger engine, the 65C18 suits bodies with high payload demands such as box bodies with tail lift, tippers and refrigerated boxes in regional distribution work, where it competes directly with light-truck ranges from other makers.
On a used example, the frame and subframe under the body count, the turbocharger and particulate filter of the EURO 4 engines, the hydraulics of a tail lift, and the brakes and tyre condition on the twin rear tyres, and the seal of the box bodies after years of varied duty; parts are supplied through the Iveco commercial-vehicle network, which is dense across Europe for the Daily range.
Sources: Kennwerte der Modelle Iveco 65C18, Iveco (Hersteller)
Technical data
Engine
| Power | 130 kWcorrect |
|---|---|
| Cylinders | 4correct |
| Displacement | 2,998 cm³correct |
Dimensions and weights
| Length | 7,700 mmcorrect |
|---|---|
| Width | 2,400 mmcorrect |
| Unladen weight | 4,000 kgcorrect |
| Gross vehicle weight | 6,500 kgcorrect |
Where this model stands
Power-to-weight ratio: 32.5 kW/t (130 kW / 4 t)
Stronger than 13% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Iveco 65C18 435 have?
The Iveco 65C18 435 delivers 130 kW.
How much does the Iveco 65C18 435 weigh?
The unladen weight is 4,000 kg.
What is the gross vehicle weight of the Iveco 65C18 435?
6,500 kg.
What engine does the Iveco 65C18 435 have?
4 cylinders, 2,998 cm³ displacement.
What are the dimensions of the Iveco 65C18 435?
7,700 mm × 2,400 mm.
When was the Iveco 65C18 435 built?
Production years: 2009.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.