Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Iveco › 40C14V CNG

Iveco 40C14V CNG

Built: 2008-2008 · Series: Trucks up to 3.5 t (Class N1)

More machines from model year 2008

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Iveco 40C14V CNG is a model in the Lkw bis 3,5 t (Klasse N1) series. Production: 2008. The engine has 4 cylinders, with a displacement of 2,998 cm³. The machine is 2,000 mm wide. The unladen weight is 2,625 kg. The wheelbase measures 3,300 mm. The gross vehicle weight is 3,500 kg. The machine runs on 4 wheels. The Lkw bis 3,5 t (Klasse N1) series covers 131 models. Unladen weight within it ranges from 1,450 to 3,395 kg; the 40C14V CNG sits in the upper part of that range with 2,625 kg. Its immediate neighbours are the IVECO 50C15 below it with 2,600 kg and the 35C12 above it with 2,630 kg. Gross vehicle weight within it ranges from 3,450 to 3,500 kg; here the 40C14V CNG sits at the top of that range with 3,500 kg. 3135 Iveco models across 106 series are on record.

Iveco trucks up to 3.5 t (class N1) – collective page of the Iveco Daily: type logic 35C to 40C by weight class, van (V), combi (S) and chassis (C) versions, engines from 85 to 150 kW, Euro 4 to EEV emission stages

The EU vehicle class N1 covers trucks and vans up to 3.5 t gross vehicle weight; this page is a collective page built from registration data (Netherlands, Finland) bundling every Iveco range recorded in that class, which consists almost entirely of the Daily, built since 1978. The type logic reads from the code: the first two digits (35, 38, 40) denote the weight class in hundreds of kilograms, the letter the body – C for chassis-cab, V for panel van, S for the combi/bus version – followed often by the emission stage such as Euro 4, Euro V HD EEV, or CNG for gas models. Iveco was formed in 1975 in Turin from the merger of the commercial-vehicle divisions of Fiat, OM, Lancia, Unic and Magirus-Deutz.

Read on 3 more paragraphs

The register lists 131 versions with kerb weights of 1,450 to 3,395 kg and gross vehicle weights of 3,450 to 3,500 kg. Engine outputs are recorded for 19 models and range from 85 to 150 kW, displacements from 2,286 to 3,000 cm³ across 4 to 6 cylinders; width runs from 1,850 to 2,360 mm, and lengths are recorded for 67 models, from 4,580 to 8,020 mm.

The Daily has for decades been the reference in the 3.5-tonne van segment with a ladder frame and rear-wheel drive, setting it apart from unibody competitors such as the Ford Transit or Mercedes-Benz Sprinter and making it especially sought after for conversions such as motorhomes, refrigerated vehicles and flatbeds; the CNG versions address chiefly the environmental requirements of urban distribution traffic.

On a used example, what matters is the condition of the ladder frame, wear of the rear leaf springs, the turbocharger and injection system of the HPI/HPT diesel engines, and on CNG models the condition of the gas tanks and their inspection deadlines. Spare parts are readily available through the dense Iveco service network; chassis-cab versions with special bodies are worth checking for the body's registration.

Sources: Kennwerte der Modelle Iveco Lkw bis 3,5 t (Klasse N1), Iveco

Technical data

Engine

Cylinders4correct
Displacement2,998 cm³correct

Dimensions and weights

Width2,000 mmcorrect
Wheelbase3,300 mmcorrect
Unladen weight2,625 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Iveco 40C14V CNG weigh?

The unladen weight is 2,625 kg.

What is the gross vehicle weight of the Iveco 40C14V CNG?

3,500 kg.

What engine does the Iveco 40C14V CNG have?

4 cylinders, 2,998 cm³ displacement.

When was the Iveco 40C14V CNG built?

Production years: 2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare