Iveco 35C18D/P
Built: 2008-2008 · Series: 35C18D
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco Daily 35C18D – 3.5-tonne class with twin rear wheels, power tier around 180 hp and crew cab: 3.0-litre four-cylinder engine, gross weight 3,500 kg, widths from 2,020 to 2,180 mm
The Iveco Daily has been built since 1978 and remains Europe's benchmark van in the 3- to 7-tonne bracket. The 35C18D type code follows the manufacturer's own logic: 35 marks the 3.5-tonne weight class, C stands for twin rear wheels rather than the single tyres of lighter versions, 18 denotes the power tier of around 180 hp, and D marks the crew cab for driver, passenger and a second row of seats.
Read on 3 more paragraphs
The register lists 5 versions, all sharing a 3.0-litre four-cylinder diesel engine (2,998 cc) and kerb weights from 2,210 to 2,950 kg against a gross vehicle weight of 3,500 kg. Width varies by body from 2,020 to 2,180 mm.
With its crew cab and twin rear wheels, the 35C18D targets trade and municipal fleets that need a load bed or box body while still carrying a crew and tools on a second bench – bodybuilders usually fit it out as a tipper or flatbed.
When buying used, check the crew cab first: seals and floor panels behind the front row are the first to rust where joints leak. The 3.0-litre engine needs attention at the turbocharger, particulate filter and timing chain, while uneven wear on the twin rear tyres points to worn stub axles or incorrect pressure. Parts are covered by Iveco's dense dealer network. Mileage can be cross-checked against the wear of the driver's seat, steering wheel and pedals, since vehicles in this class often ran in multi-shift fleet use.
Sources: Kennwerte der Modelle Iveco 35C18D, Iveco
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,998 cm³correct |
Dimensions and weights
| Width | 2,020 mmcorrect |
|---|---|
| Wheelbase | 3,750 mmcorrect |
| Unladen weight | 2,380 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Iveco 35C18D/P weigh?
The unladen weight is 2,380 kg.
What is the gross vehicle weight of the Iveco 35C18D/P?
3,500 kg.
What engine does the Iveco 35C18D/P have?
4 cylinders, 2,998 cm³ displacement.
When was the Iveco 35C18D/P built?
Production years: 2008.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.