Iveco/polmar 35S16
Built: 2020-2020 · Series: Other models
More machines from model year 2020
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco/Polmar – other models: bodies on Iveco Daily chassis 35S16 to 35S21, 2,287 to 2,998 cc, kerb weight 2,220 to 2,285 kg at a 3.5 t gross weight
Polmar is the register's name for another body builder working on the Iveco Daily. The listed types 35S16, 35S18, 35S18/PO and 35S21 follow the same Iveco type logic as other Daily converters: the first number gives the weight class around 3.5 t, S the chassis variant with long wheelbase, and the second number the engine output in hp. The shared chassis makes these vehicles the basis for box, flatbed or special bodies, of the kind built across Europe on the Iveco Daily.
Read on 3 more paragraphs
The register lists 4 versions with 2,287 to 2,998 cc from four-cylinder engines, kerb weights of 2,220 to 2,285 kg at a gross vehicle weight of 3,500 kg, a length of 7,600 mm and widths of 2,120 to 2,300 mm.
The narrow weight range of these four versions shows that they are closely related body variants of the same base vehicle, differing mainly in engine output and equipment detail. At just under 7.6 m in length, they are among the larger bodies built on the Iveco Daily and therefore served haulage or special purposes rather than typical trade use.
When buying used, key points are the condition of the chassis frame under the body, corrosion at the mounting points, and the mileage and service history of the Iveco Daily's engine and gearbox. Spare parts for engine, brakes and running gear are supplied by the Iveco dealer network; for the body itself, usually only the manufacturer Polmar remains a source.
Sources: Kennwerte der Modelle Iveco/Polmar (weitere Modelle)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,287 cm³correct |
Dimensions and weights
| Width | 2,120 mmcorrect |
|---|---|
| Wheelbase | 4,100 mmcorrect |
| Unladen weight | 2,220 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Iveco/polmar 35S16 weigh?
The unladen weight is 2,220 kg.
What is the gross vehicle weight of the Iveco/polmar 35S16?
3,500 kg.
What engine does the Iveco/polmar 35S16 have?
4 cylinders, 2,287 cm³ displacement.
When was the Iveco/polmar 35S16 built?
Production years: 2020.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.