Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Lifting magnets › ITALMEK › ITM 95 T

ITALMEK ITM 95 T

Series: ITM

Source: https://www.italmek.com/prodotto/magneti-itm-magnets-t-serie

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ITALMEK ITM 95 T belongs to the Lifting magnets category. It is a lifting magnet used to lift and handle ferromagnetic loads such as scrap or steel parts. The equipment type is Excavator magnet. It fits carrier machines from 15 to 20 tonnes operating weight. The unladen weight is 1,200 kg. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. The ITM series covers 21 models. Unladen weight within it ranges from 500 to 2,950 kg; the ITM 95 T sits in the lower part of that range with 1,200 kg. Its immediate neighbours are the ITM 95 P below it with 1,100 kg and the ITM 105 P above it with 1,300 kg. 81 ITALMEK models across 10 series are on record. The model is listed under Lifting magnets. 4 verified figures from 2 sources are on file.

Technical data

Dimensions and weights

Unladen weight1,200correct

Other data

Carrier max.20correct
Carrier min.15correct

Frequently asked questions

How much does the ITALMEK ITM 95 T weigh?

The unladen weight is 1,200 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

ITM 105 C

ITM 105 P

ITM 105 T

ITM 115 C

ITM 115 P

ITM 115 T

ITM 125 C

ITM 125 P

ITM 125 T

ITM 150 C

ITM 150 P

ITM 150 T

Sources: [1] [2]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare