Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Lifting magnets › ITALMEK › ITM 105 T

ITALMEK ITM 105 T

Series: ITM

Source: https://www.italmek.de/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ITALMEK ITM 105 T belongs to the Lifting magnets category. It is a lifting magnet used to lift and handle ferromagnetic loads such as scrap or steel parts. The equipment type is Excavator magnet. It fits carrier machines from 16 to 26 tonnes operating weight. The unladen weight is 1,450 kg. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. The ITM series covers 21 models. Unladen weight within it ranges from 500 to 2,950 kg; the ITM 105 T sits in the lower part of that range with 1,450 kg. Its immediate neighbours are the ITM 115 P below it with 1,400 kg and the ITM 115 T above it with 1,600 kg. 81 ITALMEK models across 10 series are on record. The model is listed under Lifting magnets. 4 verified figures from 2 sources are on file.

Technical data

Dimensions and weights

Unladen weight1,450correct

Other data

Carrier max.26correct
Carrier min.16correct

Frequently asked questions

How much does the ITALMEK ITM 105 T weigh?

The unladen weight is 1,450 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

ITM 105 C

ITM 105 P

ITM 115 C

ITM 115 P

ITM 115 T

ITM 125 C

ITM 125 P

ITM 125 T

ITM 150 C

ITM 150 P

ITM 150 T

ITM 75 C

Sources: [1] [2]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare