ITALMEK IP7
Series: IP
The ITALMEK IP7 is part of the Shears & pulverisers category from ITALMEK. It is a shear or pulveriser used to cut and crush reinforced concrete and steel. The equipment type is Hydraulic demolition grab. It fits carrier machines from 6 to 12 tonnes operating weight. The unladen weight is 650 kg. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. The IP series covers 10 models. Unladen weight within it ranges from 320 to 2,480 kg; the IP7 sits in the lower part of that range with 650 kg. Its immediate neighbours are the IP2 below it with 320 kg and the IP10 above it with 950 kg. 81 ITALMEK models across 10 series are on record. The model is listed under Shears & pulverisers. 4 verified figures from 2 sources are on file.
Technical data
Dimensions and weights
| Unladen weight | 650correct |
|---|
Other data
| Carrier max. | 12correct |
|---|---|
| Carrier min. | 6correct |
Frequently asked questions
How much does the ITALMEK IP7 weigh?
The unladen weight is 650 kg.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Excavator in 3D section
Turn the model, look inside and click an assembly — each one is explained.