Start › Shears & pulverisers › ITALMEK › IP25

ITALMEK IP25

Series: IP

Source: https://www.italmek.com/prodotto/hydraulic-demolition-shears

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ITALMEK IP25 belongs to the Shears & pulverisers category. It is a shear or pulveriser used to cut and crush reinforced concrete and steel. The equipment type is Hydraulic demolition grab. It fits carrier machines from 24 to 35 tonnes operating weight. The unladen weight is 2,480 kg. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. The IP series covers 10 models. Unladen weight within it ranges from 320 to 2,480 kg; the IP25 sits at the top of that range with 2,480 kg. Its immediate neighbours are the IP21 below it with 2,170 kg. 81 ITALMEK models across 10 series are on record. The model is listed under Shears & pulverisers. 4 verified figures from 2 sources are on file.

Technical data

Dimensions and weights

Unladen weight2,480correct

Other data

Carrier max.35correct
Carrier min.24correct

Frequently asked questions

How much does the ITALMEK IP25 weigh?

The unladen weight is 2,480 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

IP10

IP15 XP

IP18

IP2

IP21

IP36

IP50

IP7

IP80

Sources: [1] [2]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare