Into Technics TANKTRAILER
Built: 2022-2022 · Series: Other models
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Into Technics Tanktrailer – EU category O4 tank trailer: 34,500 kg gross weight, 26,030 kg payload, 9.45 m length, 6.47 m wheelbase, built 2022.
With a gross weight of 34,500 kg, the Into Technics Tanktrailer belongs to the EU trailer category O4, the heavy trailers and semi-trailers above 10 tonnes. The name states the body type directly: a tank trailer for carrying liquids or bulk materials in a closed vessel.
Read on 3 more paragraphs
With an unladen weight of 8,470 kg, the payload comes to 26,030 kg, more than three quarters of the gross weight, a ratio typical of tankers, since the vessel itself is comparatively light while the liquid makes up most of the load. At 9.45 m long, 2.50 m wide and with a 6.47 m wheelbase, the Tanktrailer sits on a compact chassis built for the axle load.
Tank trailers of this size run with an air brake system and usually air suspension, which keeps the vessel steady under braking and through corners. Towing in a combination requires licence category CE in the EU. Depending on the medium carried, further rules apply to compartmentation, venting and, for dangerous goods, ADR equipment.
When buying a used tank trailer, the condition of the vessel matters most: check for corrosion and dents inside and out, and inspect welds and manhole covers for tightness. The checklist should also cover the air suspension bellows for cracks, the air lines for leaks and, depending on registration, proof of the current tank inspection. Axle bearings and the brake system also belong on the checklist.
Sources: Kennwerte des Modells Into Technics Tanktrailer, RDW (Niederlande)
Technical data
Dimensions and weights
| Length | 9,450 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 6,470 mmcorrect |
| Unladen weight | 8,470 kgcorrect |
| Gross vehicle weight | 34,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Into Technics TANKTRAILER weigh?
The unladen weight is 8,470 kg.
What is the gross vehicle weight of the Into Technics TANKTRAILER?
34,500 kg.
Up to what speed is the Into Technics TANKTRAILER approved?
Approved up to 100 km/h.
What are the dimensions of the Into Technics TANKTRAILER?
9,450 mm × 2,500 mm.
When was the Into Technics TANKTRAILER built?
Production years: 2022.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.