Start › Mini excavators › IHI › 15NX-2

IHI 15NX-2

Series: IHI Mini Excavator

Source: https://www.technikboerse.com/en/gebraucht/digger-789/ihi-89

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The IHI 15NX-2 belongs to the IHI Mini Excavator series. The engine delivers 14.2 hp (10.4 kW). The unladen weight is 1,746.3 kg. The tank holds 20.1 litres. The pump delivers 48.1 l/min. Working pressure is 206 bar. The engine fitted is the 3TNV70. The IHI Mini Excavator series covers 8 models. Rated output within it ranges from 10.1 to 26.9 hp; the 15NX-2 sits in the lower part of that range with 14.2 hp. Its immediate neighbours are the 9NX-2 below it with 10.1 hp and the 25NX-2 above it with 21.4 hp. 14 IHI models across 3 series are on record. The model is listed under Excavators & compaction. 8 verified figures from 1 source are on file.

Technical data

Engine

Engine model3TNV70correct
Power14.2 hp (10.4 kW)correct

Dimensions and weights

Unladen weight1,746.3 kgcorrect

Working data

Pump flow48.1 l/mincorrect
Hydraulic pressure206 barcorrect
Fuel tank capacity20.1 lcorrect

Other data

Height2,286correct

Where this model stands

Power-to-weight ratio: 6 kW/t (10 kW / 1.7 t)

Stronger than 7% of the mini excavators in the register — out of 400 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the IHI 15NX-2 have?

The IHI 15NX-2 delivers 14.2 hp.

How much does the IHI 15NX-2 weigh?

The unladen weight is 1,746 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

25NX-2

28N-2

30NX-2

35N-2

35NX-2

35NXE-2

9NX-2

Sources: [1]

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare