Hueffermann HSK 36.88L
Built: 2014 · Series: Other models
More machines from model year 2014
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Hüffermann – other models: collective page of the roll-off container specialist from Schwarmstedt outside the named ranges, Har, Hka, Hma, Hpa, Hsa and Htm series, gross weight from 10.5 to 36 t
This page gathers Hüffermann trailers that the register could not assign to a named range. The manufacturer from Schwarmstedt in Lower Saxony specialises in roll-off container systems; the HAR, HKA, HMA, HPA, HSA and HTM model series mark different chassis versions for single and multiple containers, and the following two- to four-digit number gives the payload and design within the series.
Read on 3 more paragraphs
The register lists here 27 versions with unladen weights from 2,060 to 11,000 kg, gross vehicle weights from 10,500 to 36,000 kg, lengths from 4,880 to 11,870 mm and widths from 2,450 to 2,550 mm.
Roll-off container trailers such as Hüffermann's are the backbone of the waste and recycling industry and of construction-site logistics, moving containers for rubble, scrap and recyclables between site, depot and transfer point; in this segment Hüffermann competes with makers such as Meiller and Kel-Berg; the chassis are built for the daily swap between full and empty containers and are dimensioned accordingly robust.
When buying used, what counts is the condition and function of the hook-lift or chain roll-off system, wear on rollers and guide rails, frame cracks from the high alternating loads, and the condition of the braking system and axles; also the condition of the anchor points and container locks. Spare parts for the roll-off system are available directly through Hüffermann.
Sources: SpecCodex register, model data: Hüffermann (weitere Modelle), Hüffermann (manufacturer)
Technical data
Dimensions and weights
| Length | 10,900 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 11,000 kgcorrect |
| Gross vehicle weight | 36,000 kgcorrect |
Frequently asked questions
How much does the Hueffermann HSK 36.88L weigh?
The unladen weight is 11,000 kg.
What is the gross vehicle weight of the Hueffermann HSK 36.88L?
36,000 kg.
What are the dimensions of the Hueffermann HSK 36.88L?
10,900 mm × 2,550 mm.
When was the Hueffermann HSK 36.88L built?
Production years: 2014.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
HAP 20.72
HAR18.70
HKA 18.70
HKA 1870
HKA 28.70
HKA1870
HKA2470
HMA18.24
HMA1824
HPA2072
HPA2472
HSA1860
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
