Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › HMT › Other models › 3522 EDI (Coastal Special)

HMT 3522 EDI (Coastal Special)

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The HMT 3522 EDI (Coastal Special) is a tractor made by HMT. Engine output is 26 kW.

Within the range, rated power spans from 13 to 56 kW; with 26 kW, the 3522 EDI (Coastal Special) sits in the lower third. Directly alongside are the Yuva with 19 kW below and the 4022 Crop King with 34 kW above.

HMT – further models: the collective page for tractors from Pinjore, India, with export types Trantor 65 to Trantor 110 and the 2500 to 7500 series, Zetor-licensed design with 13 to 56 kW

This page brings together the HMT tractors that the register could not assign to a named series – from the numerous three- and four-digit types such as 2511, 3522, 4511 and 6522, to the models exported under the Trantor name: Trantor 65, 75, 90 and 110. HMT (Hindustan Machine Tools) built its tractors at the Pinjore plant in India based on a licensed Zetor design from Czechoslovakia; the Trantor range was the export version of these series for the British and international markets.

Read on 3 more paragraphs

The register lists 29 versions here, with outputs from 13 to 56 kW, or 18 to 75 hp, mostly with four-cylinder HMT diesel engines and rated speeds around 2,200 rpm.

For decades HMT was one of the large Indian tractor manufacturers, and with this broad range of types, from light two-axle tractors to mid-size farm tractors, it covered practically the entire spectrum of Indian agriculture; through the Trantor exports, tractors based on Zetor technology also reached European markets, where they appeared as an affordable alternative to Western European brands.

For a used HMT, the condition and compression of the diesel engine, the tightness of the cooling system and hydraulics, the condition of the clutch and gearbox, and wear on the axles and tyres are the key checks; since the design derives from Zetor, many wear parts fit from the Zetor spare parts range. On the export Trantor models, the condition of the electrics adapted for the European market is also worth checking.

Sources: SpecCodex register, model data: HMT (weitere Modelle)

Technical data

Engine

Engine makeHMTcorrect
Power35 hp (26 kW)correct

Drivetrain and chassis

Driverear-wheel driveWDcorrect

Origin and approval

PlantPinjore, Haryana, Indiacorrect

Frequently asked questions

How much power does the HMT 3522 EDI (Coastal Special) have?

The HMT 3522 EDI (Coastal Special) delivers 35 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare