Start › Electric motors › Hebem › FF112M-4

Hebem FF112M-4

Series: Other models

Source: http://en.hebem.com/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Hebem lists the FF112M-4 as a three-phase induction motor. The rated output is 4.5 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 400 V. The housing is frame size 112 M in foot-mounted form. The protection class is IP55. The efficiency is 87.3 per cent at full load, 87.5 per cent at 75 per cent load and 85.6 per cent at half load. The mounting arrangement to IEC 60034-7 is B5. The motor is built in China. The data is based on the Australian MEPS registration under the GEMS Determination 2012; measured to AS/NZS 1359.102.3:2000. Rated output across the Hebem range ranges from 2.2 to 4.5 kW; the FF112M-4 sits at the top of that range with 4.5 kW. Its immediate neighbours are the FF-L112M- 4 below it with 4 kW. 5 Hebem models are on record. The model is listed under Electric motors. 22 verified figures from 1 source are on file.

Technical data

Engine

Rated output4.5 kWcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles4correct
Protection classIP55correct
Frame size112 M (foot)correct
Mounting (IEC 60034-7)B5correct
Efficiency at full load87.3 %correct
Efficiency at 75 % load87.5 %correct
Efficiency at half load85.6 %correct

Origin and approval

Country of manufactureChinacorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodAS/NZS 1359.102.3:2000correct

Frequently asked questions

How much power does the Hebem FF112M-4 have?

The Hebem FF112M-4 delivers 4.5 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

FF-L112M- 4

FF-L112M1-4

FF-L112S-4

FF112S-4

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare