Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Hanomag › R324 E

Hanomag R324 E

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Hanomag R324 E is a machine built by Hanomag. The engine delivers 27 hp (20 kW), has 3 cylinders, with a displacement of 2,099 cm³. Rated speed is 1,900 rpm. The machine is 2,750 mm long and 1,660 mm high. The unladen weight is 1,520 kg. The wheelbase measures 1,700 mm. Top speed is 19.5 km/h. The tank holds 45 litres. The engine is water-cooled. The model was built in Germany. The fuel is diesel. The gearbox offers 10 forward gears. There are also 2 reverse gears. Rated output across the Hanomag range ranges from 12 to 110 hp; the R324 E sits in the lower part of that range with 27 hp. Its immediate neighbours are the WD R 26 below it with 26 hp and the R 28 N above it with 28 hp. Rated output across the Hanomag range ranges from 8.8 to 81 kW; here the R324 E sits in the lower part of that range with 20 kW. 200 Hanomag models across 22 series are on record.

Hanomag – other models: collective page of German tractors outside the named ranges, from the R types through Granit, Brillant and Perfekt to the articulated Combitrac, 8.8 to 63 kW

This page gathers the Hanomag tractors the register could not assign to a named range, from the early pre-war R types to the post-war Granit, Brillant, Perfekt and Robust ranges and the articulated Combitrac models. Hanomag, the Hannoversche Maschinenbau AG, sold its farm-equipment division to Massey-Ferguson in 1971 and ended tractor production afterwards. The R types such as the R16, R22 or R40 carry roughly their power in hp in the number, while Combitrac models such as the C218 and R440 Combitrac are articulated four-wheel-drive tractors for use in vineyards and orchards.

Read on 3 more paragraphs

The register lists here 56 versions with 8.8 to 63 kW from one- to six-cylinder engines of 511 to 5,702 cm³, unladen weights of 800 to 3,750 kg, lengths of 2,340 to 3,990 mm, widths of 1,480 to 2,110 mm and heights of 1,450 to 2,390 mm; torque ranges from 117 to 265 Nm at rated speeds of 1,100 to 2,600 rpm. Most models run on diesel, a few early types on crude oil, and the R40 Holzgas on a wartime wood-gas unit.

In the 1950s and 1960s Hanomag was among the significant German tractor makers alongside Fendt, Deutz and Eicher, focused on mid-sized yard and field tractors as well as the specialised articulated Combitrac for special crops.

When buying used, on the older R types the cooling system, injection pump and gearbox condition matter, on the Combitrac models additionally the articulation joint and four-wheel-drive bearings; parts are now only found through Hanomag specialists and reproduction-parts makers.

Sources: Kennwerte der Modelle Hanomag (weitere Modelle)

Technical data

Engine

Fueldieselcorrect
Power27 hp (20 kW)correct
Rated speed1,900 rpmcorrect
Cylinders3correct
Displacement2,099 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length2,750 mmcorrect
Height1,660 mmcorrect
Wheelbase1,700 mmcorrect
Unladen weight1,520 kgcorrect

Drivetrain and chassis

Driverear-wheel driveWDcorrect
Gearbox10/2-Getriebecorrect
Forward gears10correct
Reverse gears2correct
Top speed19.5 km/hcorrect

Working data

Fuel tank capacity45 lcorrect

Origin and approval

PlantGermanycorrect

Where this model stands

Power-to-weight ratio: 13.2 kW/t (20 kW / 1.5 t)

Power class: Compact (< 40 hp)

Stronger than 15% of the tractors in the register — out of 15,659 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hanomag R324 E have?

The Hanomag R324 E delivers 27 hp.

How much does the Hanomag R324 E weigh?

The unladen weight is 1,520 kg.

What engine does the Hanomag R324 E have?

3 cylinders, 2,099 cm³ displacement, Diesel.

How fast does the Hanomag R324 E go?

Top speed is 19.5 km/h.

What are the dimensions of the Hanomag R324 E?

2,750 mm × 1,660 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare