Hamm HD PLUS 80i VT-S
Series: Hamm Vibratory Smooth Drum Roller
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine make | DEUTZcorrect |
|---|---|
| Engine model | TCD 2.9 L4correct |
| Power | 75.3 hp (55.3 kW)correct |
| Rated speed | 2,500 rpmcorrect |
| Cylinders | 4correct |
Dimensions and weights
| Length | 4,480.1correct |
|---|---|
| Width | 1,801.4correct |
| Wheelbase | 3,340.1correct |
| Ground clearance | 750.1correct |
| Unladen weight | 10,000 kgcorrect |
Drivetrain and chassis
| Top speed | 6.6 km/hcorrect |
|---|
Working data
| Fuel tank capacity | 120.4 lcorrect |
|---|
Other data
| Height | 2,892.6correct |
|---|
Where this model stands
Power-to-weight ratio: 5.5 kW/t (55 kW / 10 t)
Stronger than 28% of the road construction in the register — out of 669 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Hamm HD PLUS 80i VT-S have?
The Hamm HD PLUS 80i VT-S delivers 75.3 hp.
How much does the Hamm HD PLUS 80i VT-S weigh?
The unladen weight is 10,000 kg.
What engine does the Hamm HD PLUS 80i VT-S have?
4 cylinders.
How fast does the Hamm HD PLUS 80i VT-S go?
Top speed is 6.6 km/h.
What are the dimensions of the Hamm HD PLUS 80i VT-S?
4,480 mm × 1,801 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Asphalt paver in 3D section
Turn the model, look inside and click an assembly — each one is explained.