Hamm 3520 HT P
Series: Hamm Vibratory Compactor
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine make | DEUTZcorrect |
|---|---|
| Engine model | TCD 2012 L06correct |
| Power | 210.8 hp (155 kW)correct |
| Cylinders | 6correct |
Dimensions and weights
| Length | 6,211.8correct |
|---|---|
| Width | 2,392.7correct |
| Wheelbase | 3,165.1correct |
| Ground clearance | 425.2correct |
| Unladen weight | 21,730 kgcorrect |
Drivetrain and chassis
| Top speed | 13 km/hcorrect |
|---|
Working data
| Fuel tank capacity | 290.3 lcorrect |
|---|
Other data
| Height | 3,051correct |
|---|
Where this model stands
Power-to-weight ratio: 7.1 kW/t (155 kW / 21.7 t)
Stronger than 72% of the compaction equipment in the register — out of 223 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Hamm 3520 HT P have?
The Hamm 3520 HT P delivers 211 hp.
How much does the Hamm 3520 HT P weigh?
The unladen weight is 21,730 kg.
What engine does the Hamm 3520 HT P have?
6 cylinders.
How fast does the Hamm 3520 HT P go?
Top speed is 13 km/h.
What are the dimensions of the Hamm 3520 HT P?
6,212 mm × 2,393 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Road roller in 3D section
Turn the model, look inside and click an assembly — each one is explained.