Technical register for agricultural, construction and commercial machinery · sourced data

Grove AT1100

Series: Grove All Terrain Crane

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Grove AT1100 belongs to the Grove All Terrain Crane series. The engine delivers 399.8 hp, has 10 cylinders, with a displacement of 16,000.3 cm³. Torque is 600.1 Nm. Rated speed is 2,300 rpm. The machine is 2,900 mm wide. The unladen weight is 60,000 kg. The wheelbase measures 7,800 mm. Ground clearance is 301.8 mm. The gross vehicle weight is 60,000 kg. The gearbox has 8 forward gears. There are also 4 reverse gears. The machine runs on 10 wheels. Maximum torque is reached at 1,500 rpm. The electrical system runs on 24 V. Tyre size: 16,00x25 radials. The Grove All Terrain Crane series covers 57 models. Rated output within it ranges from 149.6 to 609.1 hp; the AT1100 sits in the middle of that range with 399.8 hp. Its immediate neighbours are the GMK3060 below it with 360.3 hp and the AT700D above it with 405.2 hp. Unladen weight within it ranges from 10,500 to 91,327.6 kg; here the AT1100 sits in the upper part of that range with 60,000 kg. 364 Grove models across 11 series are on record.

Grove AT865, AT1100: the number after AT marks the tonnage class

On Grove all-terrain cranes, AT stands for "All Terrain", and the number that follows roughly indicates the capacity class in US tons. Factory data puts the AT865's maximum lift capacity at 130,000 lb, just under 59 tonnes, while the AT1100 reaches 220,000 lb, roughly 100 tonnes — the model number sits noticeably above the actual maximum load because it marks the broad market class rather than the exact figure from the load chart.

Read on 3 more paragraphs

The "Grove All Terrain Crane" bucket spans smaller classics like the AT400, mid-range models such as the AT422E, AT635E and AT745, up to the large AT865, AT880 and AT1100. Letter suffixes such as E or S generally mark updated variants within a given tonnage class, though the available sources do not support a single, consistent meaning for these letters across every class.

The register's 57 active models span an operating weight of 10,500 to 91,327 kg, engine power from 110 to 447 kW, 6- to 10-cylinder engines, and displacement from 5701 to 16,000 cm³ — a wide technical spread between compact site cranes and heavy-lift machines.

Buying used, what matters most on all-terrain cranes is the condition of the telescopic boom and its slide pads, along with the load-test history. Checking the supplied load chart shows whether the real capacity at a given boom angle still matches the factory figures.

Sources: SpecCodex register, model data: Grove All Terrain Crane, RitchieSpecs: Grove AT865 All Terrain Crane, RitchieSpecs: Grove AT1100 All Terrain Crane

Technical data

Engine

Power399.8 hpcorrect
Rated speed2,300 rpmcorrect
Torque600.1 Nmcorrect
Speed at max. torque1,500 rpmcorrect
Cylinders10correct
Displacement16,000.3 cm³correct

Dimensions and weights

Width2,900 mmcorrect
Wheelbase7,800 mmcorrect
Ground clearance301.8 mmcorrect
Unladen weight60,000 kgcorrect
Gross vehicle weight60,000 kgcorrect

Drivetrain and chassis

Gearbox typepowershift transmissioncorrect
Forward gears8correct
Reverse gears4correct
Wheels10correct
Tyre size16.00x25 radialscorrect

Other data

System voltage24 Vcorrect

Where this model stands

Power-to-weight ratio: 4.9 kW/t (294 kW / 60 t)

Stronger than 66% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Grove AT1100 have?

The Grove AT1100 delivers 400 hp.

How much does the Grove AT1100 weigh?

The unladen weight is 60,000 kg.

What is the gross vehicle weight of the Grove AT1100?

60,000 kg.

What engine does the Grove AT1100 have?

10 cylinders, 16,000 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare